Mike Phillips
05-19-2015, 05:48 PM
2-3 guys needed - Pontoon Boat Project - Tomorrow! (Wednesday)
Start time is 8:00am, Wednesday May 20th
For all our regular Thursday night guys as I mentioned last week during the Bayliner wetsanding project, I might have a Pontoon boat here next week.
Well it's next week. :D
I knocked out one side but the other side still needs an extreme makeover. I did a lot of tool, pad and product testing and dialed-in a system that makes restoring neglected and oxidized aluminum Bubba-proof with just about any tool.
The other side still needs to be machine sanded and buffed. I'm going to start at 8:00am and work till she's finished.
My guess is by myself I can knock this project out in about 5 to 6 hours. With a 2 to 3 guys helping I think we can knock it out in 3 hours max.
Note: Buffing out aluminum a lot more work than buffing out a car so keep that in mind when volunteering. I've dialed-in a process that takes a LOT of the labor out of this type of work but still, you're going to be sanding and buffing.
If you want to be a part of this project please reply to this thread or shoot me an e-mail.
mike.phillips@autogeek.net (mike.phillips@autogeek.net)
I'll be in the garage at 8:00am for anyone that wants to join in the fun...
Here's the before shot....
http://www.marine31online.com/gallery/data/536/Sun_Tracker_Pontoon_Boat_001.jpg
This my friends are what I call test spots....
http://www.marine31online.com/gallery/data/536/Sun_Tracker_Pontoon_Boat_009.jpg
This side is ready for the Sandbar!
http://www.marine31online.com/gallery/data/536/Sun_Tracker_Pontoon_Boat_011.jpg
Before
http://www.marine31online.com/gallery/data/536/Sun_Tracker_Pontoon_Boat_008.jpg
After
http://www.marine31online.com/gallery/data/536/Sun_Tracker_Pontoon_Boat_010.jpg
So it's just the other side of this Pontoon boat we have to tackle and with the system I've dialed-in it will go pretty fast.
Do wear work clothes as you tend to get dirty when sanding and buffing aluminum.
:xyxthumbs:
Start time is 8:00am, Wednesday May 20th
For all our regular Thursday night guys as I mentioned last week during the Bayliner wetsanding project, I might have a Pontoon boat here next week.
Well it's next week. :D
I knocked out one side but the other side still needs an extreme makeover. I did a lot of tool, pad and product testing and dialed-in a system that makes restoring neglected and oxidized aluminum Bubba-proof with just about any tool.
The other side still needs to be machine sanded and buffed. I'm going to start at 8:00am and work till she's finished.
My guess is by myself I can knock this project out in about 5 to 6 hours. With a 2 to 3 guys helping I think we can knock it out in 3 hours max.
Note: Buffing out aluminum a lot more work than buffing out a car so keep that in mind when volunteering. I've dialed-in a process that takes a LOT of the labor out of this type of work but still, you're going to be sanding and buffing.
If you want to be a part of this project please reply to this thread or shoot me an e-mail.
mike.phillips@autogeek.net (mike.phillips@autogeek.net)
I'll be in the garage at 8:00am for anyone that wants to join in the fun...
Here's the before shot....
http://www.marine31online.com/gallery/data/536/Sun_Tracker_Pontoon_Boat_001.jpg
This my friends are what I call test spots....
http://www.marine31online.com/gallery/data/536/Sun_Tracker_Pontoon_Boat_009.jpg
This side is ready for the Sandbar!
http://www.marine31online.com/gallery/data/536/Sun_Tracker_Pontoon_Boat_011.jpg
Before
http://www.marine31online.com/gallery/data/536/Sun_Tracker_Pontoon_Boat_008.jpg
After
http://www.marine31online.com/gallery/data/536/Sun_Tracker_Pontoon_Boat_010.jpg
So it's just the other side of this Pontoon boat we have to tackle and with the system I've dialed-in it will go pretty fast.
Do wear work clothes as you tend to get dirty when sanding and buffing aluminum.
:xyxthumbs: