Marine 31 Forum

Marine 31 Forum (http://www.marine31online.com/forum/index.php)
-   Ship Shape TV Schedule (http://www.marine31online.com/forum/forumdisplay.php?f=13)
-   -   Ship Shape TV - Cleaning non-skid surfaces by machine with Marine 31 Port to Starboard APC (http://www.marine31online.com/forum/showthread.php?t=17)

Mike Phillips 05-10-2013 01:53 PM

Ship Shape TV - Cleaning non-skid surfaces by machine with Marine 31 Port to Starboard APC
 
Ship Shape TV - Cleaning non-skid surfaces by machine with Marine 31 Port to Starboard APC


This is the third segment John and I shot for an upcoming episode of Ship Shape TV. In this segment we're going to show people the faster, easier and more effective way to clean non-skid surfaces and that' by machine using Marine 31 Port to Starboard All Purpose Cleaner.

Here's John and I reading the directions for Marine 31 Port to Starboard All Purpose Cleaner. This product is RTU or Ready to Use right out of the bottle or you can dilute it up to 10:1 for lighter cleaning of more delicate surfaces.

http://www.marine31online.com/galler...n_Skid_001.jpg


John explaining the difference between molded-in non-skid and non-skid materials like SeaDek, which is in John's 13" Boston Whaler.

http://www.marine31online.com/galler...n_Skid_002.jpg


Here I'm giving John two options,
1. Clean the non-skid surface the old-fashioned way using a brush and lots of elbow grease

2. Use a tool like either the Cyclo Polisher or the Porter Cable Polisher with a brush attached where a buffing pad is normally used.
http://www.marine31online.com/galler...n_Skid_003.jpg


In the segment we talk about the differences in the types of brushes such as how aggressive or non-aggressive the bristles are...

http://www.marine31online.com/galler...n_Skid_004.jpg


Mike and Bert the cameramen running the cameras...

http://www.marine31online.com/galler...n_Skid_005.jpg

http://www.marine31online.com/galler...n_Skid_006.jpg

http://www.marine31online.com/galler...n_Skid_006.jpg



Here's Johnathan, John's son giving the Cyclo a try to the molded-in non skid floor...

http://www.marine31online.com/galler...n_Skid_008.jpg


Mike filming John...

http://www.marine31online.com/galler...n_Skid_009.jpg



Here's both Johnathon and John machine scrubbing the non-skid floor. John is using the Porter Cable 7424XP

http://www.marine31online.com/galler...n_Skid_010.jpg

http://www.marine31online.com/galler...n_Skid_011.jpg

http://www.marine31online.com/galler...n_Skid_012.jpg

http://www.marine31online.com/galler...n_Skid_013.jpg


We didn't capture the before shots with our still camera but you'll see how dirty the floor is on the TV show.



After scrubbing the floors with the Port to Starboard APC we moved the boat outside and then sprayed it down with a Foam Gun and then rinsed out the inside of the boat.

The Marine 31 Port to Starboard APC worked flawlessly by machine to thoroughly clean the the molded-in non-skid surfaces for the floor and the softer non-skid SeaDek surfaces.

http://www.marine31online.com/galler...n_Skid_014.jpg

http://www.marine31online.com/galler...n_Skid_015.jpg

http://www.marine31online.com/galler...n_Skid_016.jpg



The inside of this boat probably hasn't been this clean since it was brand new...


On Marine31.com

Marine 31 Port to Starboard All Purpose Cleaner

Porter Cable 7424XP

Cyclo Polisher Model 5 Pro

Cyclo Polisher Brushes


:)


All times are GMT -4. The time now is 11:41 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.