Sign-up: 2006 Proline 24’ Supersport Boat Detailing Class
Sign-up: 2006 Proline 24’ Supersport Boat Detailing Class
On Thursday, August 29th starting at 5:00pm there will be a boat detailing class here at Autoogeek's Show Car Garage. Our project boat is a 2006, Proline 24' Supersport Center Console boat. http://www.marine31online.com/galler..._Class_001.jpg http://www.marine31online.com/galler..._Class_002.jpg http://www.marine31online.com/galler..._Class_003.jpg http://www.marine31online.com/galler..._Class_004.jpg http://www.marine31online.com/galler..._Class_005.jpg http://www.marine31online.com/galler..._Class_006.jpg http://www.marine31online.com/galler..._Class_007.jpg http://www.marine31online.com/galler..._Class_008.jpg http://www.marine31online.com/galler..._Class_009.jpg Sign-up List 1. Mike Phillips - Of course I'll be here! 2. Niki 3. gaa07 aka Guilermo Alvarez 4. Jose Alvarez 5. Steve aka redslayer069 6. 7. 8. 9. 10. Date: Thursday, August 29th, 2013 Time: 5:00pm to 9:00pm Autogeek's Garage 7744 SW Jack James Drive Stuart, FL 34997 Mapquest Driving Directions The door to the right of the garage door is the entrance to our TV Studio, my red Chevy Silverado is usually parked right in front of the entrance door. http://www.autogeekonline.net/galler...Studio_001.jpg See you here! :thumb: |
Re: 2006 Proline 24’ Supersport Boat Detailing Class
We'll be testing out our new heavy cut cleaner/wax in the Marine 31 line.
http://www.marine31online.com/galler...leaner_Wax.jpg http://www.autogeekonline.net/forum/...lies/smile.gif |
Re: 2006 Proline 24’ Supersport Boat Detailing Class
that's a nice boat. it'll be a lot nicer when you guys give it the marine 31 shine !
|
Re: Sign-up: 2006 Proline 24’ Supersport Boat Detailing Class
It's a very nice looking center console in the pictures. Can't wait to see it in person.
We'll be shooting some new episodes for Ship Shape TV using this boat during the day and then detailing her Thursday night. :) |
Re: Sign-up: 2006 Proline 24’ Supersport Boat Detailing Class
Mike,
Heading out of town. Won't be able to make this one. Catch you next time. Craig |
Re: Sign-up: 2006 Proline 24’ Supersport Boat Detailing Class
Quote:
No problemo Craig... we always appreciate you when you join us as you always do a great job! :thumb: |
Re: Sign-up: 2006 Proline 24’ Supersport Boat Detailing Class
I couldnt miss this Mike. New guy here.. Joseph B
|
Re: Sign-up: 2006 Proline 24’ Supersport Boat Detailing Class
Quote:
Cool. It will be fun and there should be plenty to do. My friend Jay will be joining us to help us install the new graphics which is a nice skill set to have. :thumb: |
Re: Sign-up: 2006 Proline 24’ Supersport Boat Detailing Class
Here's a extra bonus for everyone joining us this Thursday night, my buddy Jay will be here to help install the new graphics.
Jay is very good at this and this is your chance to see and learn how to do this type of work. Jay did the installation of his own graphics and everyone really enjoyed this project and the graphics came out PERFECT! M101 Foam Cut Compound - 1999 Trans Am Extreme Makeover at Autogeek Here's a single post from the above write-up... For anyone that's never removed old, dried-out, cracked and baked-on vinyl graphics, I have enough pictures to make a pretty good how-to article. For now here's a few pictures to give you an idea. It took about 2 hours to remove all the vinyl graphics and then rub and scrub all the adhesive left behind off the paint AND do it in a way that did not harm the original paint. Re-applying all of the new vinyl graphics took at around 3 hours... We didn't just buff this car out, we first removed all the graphics, then buffing it out, polished it and sealed it with a synthetic paint sealant and then applied all of the new graphics... just another furn project on AutogeekOnline.net! Here's one picture, hang tight for a few more... Jay heating the vinyl graphics up using a simple Conair Hair Blow Dryer... http://www.autogeekonline.net/galler...nished_046.jpg http://www.autogeekonline.net/galler...nished_047.jpg Here's Ken and I using a Heat Gun, when using a Heat Gun instead of a hair dryer you really need to be careful that you don't get the paint itself too hot... http://www.autogeekonline.net/galler...nished_048.jpg New graphics going on... this was hours later after we meticulously buffed the hood to remove most of the Ghosting and all of the adhesive residue... http://www.autogeekonline.net/galler...nished_049.jpg http://www.autogeekonline.net/galler...nished_050.jpg http://www.autogeekonline.net/galler...nished_051.jpg http://www.autogeekonline.net/galler...nished_052.jpg Here you can see that we removed the rear spoiler in order to apply the racing stripes to the deck lid... http://www.autogeekonline.net/galler...nished_053.jpg After putting he racing stripes on the spoiler we're not re-attaching it... http://www.autogeekonline.net/galler...nished_054.jpg http://www.autogeekonline.net/galler...nished_055.jpg One thing for sure, everyone has a lot of fun during these types of cool projects, makes new friends and gets the chance to use new tools, pads and yes... products like Meguiar's M101 Foam Cut Compound... http://www.autogeekonline.net/galler...nished_056.jpg Carefull.... easy does it.... http://www.autogeekonline.net/galler...nished_057.jpg http://www.autogeekonline.net/galler...nished_058.jpg Jay installing all the lettering... http://www.autogeekonline.net/galler...nished_059.jpg Windshield graphics going on.... http://www.autogeekonline.net/galler...nished_060.jpg http://www.autogeekonline.net/galler...nished_061.jpg Results! http://www.autogeekonline.net/galler...nished_007.jpg http://www.autogeekonline.net/galler...nished_006.jpg http://www.autogeekonline.net/galler...nished_004.jpg http://www.autogeekonline.net/galler...nished_009.jpg http://www.autogeekonline.net/galler...nished_013.jpg http://www.autogeekonline.net/galler...nished_018.jpg So be ready to learn and have some fun! :thumb: |
Re: Sign-up: 2006 Proline 24’ Supersport Boat Detailing Class
Jay sent me a list of things we'll need to install the graphics. First list we have, second list we need to get.
Need to get
I'm thinking a PBE store might have some hard plastic squeegees for applying/mixing and spreading Bondo? :) |
All times are GMT -4. The time now is 11:10 PM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.