Marine 31 Forum

Marine 31 Forum (http://www.marine31online.com/forum/index.php)
-   Metal Polishing (http://www.marine31online.com/forum/forumdisplay.php?f=7)
-   -   Boat railing pad size? (http://www.marine31online.com/forum/showthread.php?t=332)

firstbase 10-26-2017 12:50 PM

Boat railing pad size?
 
I see others using a rotary to polish and protect boat railings and am going to try this on mine. Used my Fein Multimaster with a thin felt pad on the flybridge railing and it did well with the Marine 31 metal polish and sealant. Am also buying some of the Finish Cut Metal Restoring Polish. Don't know if it is better or worse or what the difference between it and the other two part product is. Just thinking that maybe my rotary or DA would be a little better than the Fein. I have the PE-14 for my rotary and the 3401 as a DA. Which to use and what size/type of pad? Is smaller better for the railings? 3"? Or is the 6.5" or so easier to control? Seems like I would have product flung everywhere! Any comments or techniques appreciated.

Mike Phillips 01-31-2018 04:21 PM

Re: Boat railing pad size?
 
Quote:

Originally Posted by firstbase (Post 1480)

I see others using a rotary to polish and protect boat railings and am going to try this on mine.

Used my Fein Multimaster with a thin felt pad on the flybridge railing and it did well with the Marine 31 metal polish and sealant.

When you say flybridge railing, do you mean railing that has a chrome surface or something else?


:)


All times are GMT -4. The time now is 07:20 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.