View Single Post
Old 10-20-2016, 10:32 AM   #2
Mike Phillips
 
Mike Phillips's Avatar
 
Status: Director of Training
Join Date: Apr 2013
Posts: 675
Default Re: Removing Captain's Boat Coating

The best way to start over and make sure not only is all of the coating removed but also the gel-coat is prepped for a coating would be to re-compound or re-polish the gel-coat.

I'd use the Captain's One-Step Compound & Polish with a foam cutting pad on a FLEX 3401 as this will remove the coating, remove any other defects and leave the surface with a high gloss finish. Then chemically strip to remove the polishing oils and then coat.





__________________
Made by boat people for boat people...
Mike Phillips is offline   Reply With Quote