Thread
:
24' Pro-Line Boat - Extreme Marine Makeover - Oxidation Removal
View Single Post
08-30-2013, 01:29 PM
#
3
Mike Phillips
Status:
Director of Training
Join Date:
Apr 2013
Posts:
675
Re: 24' Pro-Line Boat - Extreme Marine Makeover - Oxidation Removal
While most of us were working on removing oxidation and/or using a cleaner/wax on the cap, Jay and Steve were using HEAT GUNS to remove the old graphics and the Boot Stripe.
Jay is really good at getting just the right balance of heat and pulling on the old boot stripe without tearing the old, weathered vinyl...
Steve's working on removing the boot stripe on the other side...
Success! The vinyl boot stripe is off the boat and on Jay! Thank you Jay!
You ca also see Paul following Jay and using 3M Adhesive Remover to remove the adhesive residue. Thanks Paul!
__________________
Made by boat people for boat people...
Mike Phillips
View Public Profile
Send a private message to Mike Phillips
Visit Mike Phillips's homepage!
Find More Posts by Mike Phillips