View Single Post
Old 05-06-2014, 02:03 PM   #3
Mike Phillips
 
Mike Phillips's Avatar
 
Status: Director of Training
Join Date: Apr 2013
Posts: 668
Default Re: How to wetsand, cut and buff a gel-coat boat

It's 5:00 O'clock and we're ready to get started!


Here's Antti machine damp sanding the hull of this Shearwater to quickly remove 6 years of oxidation, staining and water spots.











Here's John sanding down the other side....






This was John's first time to machine sand a boat using a Rupes Duetto....






Here's what the sanding marks look like as John works down the side of the hull....






Sanding is the easy part.... getting out your sanding marks is the tricky part...


__________________
Made by boat people for boat people...
Mike Phillips is offline   Reply With Quote