View Single Post
Old 05-06-2014, 02:08 PM   #9
Mike Phillips
 
Mike Phillips's Avatar
 
Status: Director of Training
Join Date: Apr 2013
Posts: 675
Default Re: How to wetsand, cut and buff a gel-coat boat

Finished!

Wait till you see the pictures!


The Rupes TA50 and the Rupes Duetto were killer for this boat!






We cut up 2" Meguiar's Xtra Cut MF Discs to to remove the oxidation around the lettering on the back of the boat and it worked awesome!

We used the Duetto and the Rupes #3000 sanding discs to sand down the entire boat. Most of the guys had never machine sanded and none of the guys had used the Rupes TA50 before.

And best of all, (besides the boat coming out looking like brand new), was John from India was able to join us!


__________________
Made by boat people for boat people...
Mike Phillips is offline   Reply With Quote